NEW XCMG Rough Terrain Crane XCR30
ID:
2695
Units Available: 2
Category: Rough Terrain Crane
International Certifications: EU, China, USA
NEW
Mileage Hrs/Kms: 0
Year of Manufacture: 2024
The price: P.O.A.
Why wait? There's no better time to reserve than right NOW
Units Available: 2
Category: Rough Terrain Crane
International Certifications: EU, China, USA
NEW
Mileage Hrs/Kms: 0
Year of Manufacture: 2024
The price: P.O.A.
Why wait? There's no better time to reserve than right NOW
NEW XCMG Rough Terrain Crane XCR30 , Maximum rated lifting capacity 30t
XCMG rough terrain cranes, with excellent performance, can drive on complex road surfaces and have strong cross-country adaptability. They can be used for multiple purposes, have high lifting and driving efficiency, and provide convenient and fast transfer with no burden.
XCR30 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc. XCMG G1 generation rough terrain crane XCR30 is designed with four innovative technologies integrated to create an ultra high performance ,green and energy saving efficient and intelligent lifting equipment. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2). Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip. The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
HOT PRICE FOR AFRICA AND THE MIDDLE EAST
Since foundation in March 1943, XCMG has always kept its leading role in Chinese and World construction machinery industry.As one of Top 5 World Manufacturers of excavator, loader, crane, roller, grader, dump trucks etc.
Industry position
Business leader of China articulated Heavy dump truck.
Business standards maker of China articulated Heavy dump truck.
We sell all machinery at the factory selling price. All machines are in stock and ready for shipment Minimum quantity 1 machine Delivery Time 20-25 days Supply Ability 100 units per month
Maximum rated lifting capacity(t) 30 Fully-extended boom(m) 35 Engine rated power(KW/rpm) 162/2000 Certification GS, RoHS, CE, ISO9001 FEATURE of the XCMG Rough Terrain Crane XCR30 1. The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted from the rated lifting load.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection. Take boom deflection into consideration before beginning a lifting operation.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
6. The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
The specification of the XCMG Rough Terrain Crane XCR30
Measurements Parameters
Wheel Base (mm) 3600
Wheel Track (mm) (Front/Rear)2300/2300
Weight Parameters
Gross Vehicle Weight When Driving (kg) 27334
Axle Load (kg) (1st axle/2nd axle)13157/13763
Kinetic Paremeter
Engine Type - B6.7
Engine Net Power (kw/[r/min]) 145
Driving Parameters
Driving
Max Travel Speed (km/h) 41
Min Travel Speed (km/h) 1.6
Min Turning Radius (m) 9.6
Max Gradeability (%) 78
Min. Ground Clearance of Machine (mm) 345
Approach Angle 20.5 deg.
Departure Angle 19.6 deg.
Braking Distance (m) 9
Major Performance Parameters
Max. Rated Lifting Capacity (t) 30
Min. Rated Range (m) 3
Max. Load Moment of Basic Jib (kN·m) 989.8
Radius of Gyration of Turntable Tail (mm) 3823
Outrigger
Longitudinal (m) 6.8
Horizontal (m) 6.8
Max. Lifting Height
Basic Boom (m) 10.2
Longest Main Boom (m) 34.4
Longest Main Boom + Auxiliary Boom (m) 42.2
Boom Length of Crane
Basic Boom (m) 10.8
Longest Main Boom (m) 35
Longest Main Boom + Auxiliary Boom + Extension
- -
Wheel Base (mm) 3600
Wheel Track (mm) (Front/Rear)2300/2300
Weight Parameters
Gross Vehicle Weight When Driving (kg) 27334
Axle Load (kg) (1st axle/2nd axle)13157/13763
Kinetic Paremeter
Engine Type - B6.7
Engine Net Power (kw/[r/min]) 145
Driving Parameters
Driving
Max Travel Speed (km/h) 41
Min Travel Speed (km/h) 1.6
Min Turning Radius (m) 9.6
Max Gradeability (%) 78
Min. Ground Clearance of Machine (mm) 345
Approach Angle 20.5 deg.
Departure Angle 19.6 deg.
Braking Distance (m) 9
Major Performance Parameters
Max. Rated Lifting Capacity (t) 30
Min. Rated Range (m) 3
Max. Load Moment of Basic Jib (kN·m) 989.8
Radius of Gyration of Turntable Tail (mm) 3823
Outrigger
Longitudinal (m) 6.8
Horizontal (m) 6.8
Max. Lifting Height
Basic Boom (m) 10.2
Longest Main Boom (m) 34.4
Longest Main Boom + Auxiliary Boom (m) 42.2
Boom Length of Crane
Basic Boom (m) 10.8
Longest Main Boom (m) 35
Longest Main Boom + Auxiliary Boom + Extension
- - Warranty terms
12 months since arrival at destination port
Customize product
We can put the label of your logo on the products or make the silk print of your logo on the products. It is free. OEM and ODM are welcomed from GT. We have rich experiences in this area.
Pre-sale service
Arranging of independent inspection We can provide a full Pre-sale service Please see more
SPARE PARTS
We have a full stock of spare parts. These parts are always on stock which avoids and delays in ordering.
SHIPPING
We can arrange shipping from our yard to your door worldwide.Well choose the nearest shipping place to ship at the shortest time. Please see more
Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's