You are here: Ex.Military Trucks with the crane 8x8, 8x6, 6x6, 6x2, 4x4 » Man 8x8 CAT A1 cargo truck with HIAB Crane

---

Print this page

ID:  324 | Ref MOD:40041
Location: The Rocket site, Doncaster, The UK
Manufactured by:   MAN
Units Available:   1

---

Mileage Hrs/Kms: 20,000-40,000 kms
Year of Manufacture: 1990


The price: P.O.A. Man 8x8 CAT A1 with 24t/mtr HIAB Crane and 20` Drop Side Cargo Body (with Twist Locks).
All trucks are ex reserve stock, 10,000 - 40,000 kilometres.
Standard width of 2.5 m wide.
Export Requirements ...more OGEL/SIEL Licence Required

About Chassis MAN CAT A1 8x8

military MAN CAT A1 8x8 15t 8x8 Chassis cab 2.9 and 2.5 mtr was developed by MAN trucks to accommodate loads
with high centres of gravity.

No strategic vehicle is more reliable and long-lived
The A1 series is probably the most mobile and reliable truck on earth. It is primarily deployed as a carrier
for sensitive weapons systems, since its boxed frame structure does not pass on any torsion, even when driving
at full speed in difficult terrain. It is the only truck with a loading interface on which a Patriot system
can be mounted entirely without compromising mobility.
Vehicles in the A1 series are military trucks with strategic importance.
Their rigid axles and boxed frame construction give them an unsurpassed record of mobility and reliability
in any terrain.
It was scheduled for 30 years of use, making it the military vehicle with just about the lowest
lifecycle costs of any in existence.



Could the military MAN CAT A1 8x8 ever get in it up to their neck?
Not a chance, since they are ideally equipped even for deep water.
Without preparation for instance the A1 has a fording depth of
1200 mm in accordance with STANAG 2805. Their service profi le
includes a large ground clearance, very good angles of approach and departure and enormous
permanent climbing capacity (60 %) together with a ditch crossing ability of up to 1.9 m
(depending on the wheel formula), a step climbing ability of 0.6 m
(depending on the tyre size) and a maximum side slope of 40 %.

Last but not least they are designed for climatic zones A1 to C1
according to STANAG 2895, and even with the series equipment
they can withstand extreme outside temperatures from minus 50
to plus 50 degrees Celsius.


A strong basis - the ladder frame.
The body-friendly, low torsion ladder frame of the MAN CAT A1 8x8 is based on
the tried and tested series frame of the civilian TGA range and is
designed for service with a large off road proportion - reliability
built-in. It is made of high-strength, fi ne grain steel and has riveted
and bolted cross members and a steel bumper. Due to the low
torsion frame, comfortable and gentle transport is guaranteed.
The lateral acceleration acting on the platform or body is low.


MAN CAT A1 8x8 Comfortable and robust - the leaf suspension.
Like the frame the suspension has stood the test in many thousands
of MAN vehicles. The leaf suspension further developed for
the A1 & SX with long, wear-free, rubber mounted springs, large shock
absorbers and stabilisers absorb most ground irregularities.


100 % torsional stiffness – the box-type frame.
The extremely torsion resistant box frame with hollow longitudinal
members and welded tubular cross members put the A1 & SX in a
class of its own. With this design the suspension absorbs even
extreme terrain irregularities. The desired consequence: the body
remains unaffected even during fast off-road driving.

First class order: Maintenance and care
The cab can be hydraulically tilted to a position ideal for
work on the engine and gearbox, air drier, solenoid and
ventilation valves. For day-to-day checks the front panel
gives access to the engineoil fi ller neck, containers for the
washer fl uid, brake and other electric connections. The oil
reservoir for the supply of the steering and auxiliary hydraulics
is situated behind the cab. Thanks to the sight glasses the
fl uid level can be checked at a glance. The cab fl oor
can easily be sprayed out with a water hose for cleaning.

Specifications of the MAN CAT A1 8x8 military Chassis cab

Technical Specification of DEUTZ BF8L513 Diesel Engine

Engine model BF8L513FC 360hp / 265(kW)
Inspiration Turbocharged Intercooled
Cylinder 8 in V
Bore /Stroke (mm) 125/130
Displacement (L) 12.763
Rated speed (rpm) 2300
Max torque /speed (N.m/rpm) 1170/1500
Lowest fuel consumption (g/kw.h) 212
Ldile speed r/min 600

Compression Ratio 15.8:1
Continue Power As Per ISO3046/1(kW/rpm) 137/1500 200/2300
Intermittent Power As Per ISO3046/1 (KW/rpm) 210/2300
Highly Intermittent (kw/rpm) 222/2300
Automotive Power As Per ISO1585 235/2300
Max.Torque/Speed (N.M/rpm) 905/1500
Cold Style: Air-cooled

lubrication forced-feed lubrication, 26 l oil
battery 2 x 12 V 125 Ah
generator three-phase generator 24 V 55 A
starter 24 V 6 PS

Load area 7.2m x 2.44m
Load area 1.54m from ground
Ground clearence 0.41m
Max cruise speed 90km/h
Fuel tank capacity 400litres


Power transmission

all wheel drive, distributor locking-differential + locking-differential backwards,
engine in the back of driver`s cab

clutch

single-plate dry clutch, hydraulic transformer
transmission 6 speed transmission (ZF S 6-65)
synchronizer I - VI
gear ratio reduction 6.734


Chassis MAN CAT A1 8x8

box-type section frame
front suspension 1 rigid axle, steering, coil springs
rear suspension 1 rigid axle, steering, coil springs
steering system recirculating ball hydraulics
foot brake compressed air-hydraulic dual-circuit brake, 6 wheels
hand brake accumulator, rear wheels
engine brake compressed air


General data MAN CAT A1 8x8 military

wheelbase 1930 + 3670 + 1400 mm
Length 10.27m
Height 2.90m
Width 2.90m
G.V.W. 12,800kg
cargo area 7200 x 2440 mm
loading height 1650 mm
tires 14.00 R 20 M /
ground clearance 415 mm
fording depth 1200 mm
turning circle 26.4 m
total weight (perm.) 27200 kg
top speed 90 km/h
fuel tank capacity 400 l

---

Released from service by the British MOD (Ministry of Defence)
Export Requirements: SIEL Stock (Standard Individual Export Licence) View Details
Orders: 86778

Title: *	Please Select Mr Miss Mrs Ms Dr Rev Prof
Name:*
Company:
Country: *	Austria Albania Andorra Australia Armenia Azerbaijan Antigua and Barbuda Anguilla Angola Afganistan Argentina American Samoa Aruba Algeria Belgium Bosnia-Herzegovina Belarus Barbados Banglades Burkina Faso Bulgaria Bahrain Burundi Brazil Benin Bermuda Brunei Darussalam Bolivia Bahamas Buthan Bouvet Island Botswana Belize Canada Croatia Czech Republic China Cocos Islands Central African Republic Congo Chile Cameroon Cook Islands Colombia South Africa Costa Rica Cuba Cambodia Cape Verde Comoros Christmas Island Cyprus Cayman Islands Chad Denmark Djibouti Dominica Dominican Republic Estonia Ecuador Egypt Ethiopia El Salvador East Timor France Finland Fiji Falkland Islands Faroe Islands France (European Territory) Germany Greece Gabon Georgia Grenada Ghana Gibraltar Greenland Guadeloupe Equatorial Guinea Guyana Gambia Guinea Guatemala Guam Guinea Bissau Hungary Hong Kong Heard and McDonald Islands Honduras Haiti Italy Ireland Iceland Indonesia Israel India Indian British Ocean Territory Iraq Iran Ivory Coast Japan Jamaica Jordan Kazachstan Kyrgyzstan Kenya Kiribati Kuwait Saint Kitts Nevis Anguilla North Korea Latvia Lithuania Liberia Lesotho Luxembourg Libya Laos Lebanon Liechtenstein Macedonia Morocco Moldova Monaco Madagascar Marshall Islands Mali Myanmar Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Mongolia Micronesia Netherlands Norway Netherland Antilles Namibia New Caledonia Niger Norfolk Island Nigeria Nicaragua New Zealand Nepal Nauru Niue Oman Portugal Poland Romania Pitcairn Puerto Rico Palau Paraguay Panama Peru Polynesia Papua New Philippines Pakistan Qatar Russia Reunion Rwanda Spain Slovak Republic Sweden Switzerland South Korea Saint Lucia Sri Lanka Samoa Saint Pierre and Miquelon Saudi Arabia Solomon Islands Seychelles Sudan Singapore Saint Helena Saint Helena Svalbard and Jan Mayen Islands Sierra Leone San Marino Senegal Somalia Suriname Saint Tome and Principe Saint Vincent and Grenadines Syria Swaziland Turkey Turkmenistan Togo Thailand Tokelau Tunisia Tonga Trinidad and Tobago Tuvalu Taiwan Tanzania Turks and Caicos Islands United Kingdom United States United Arab Emirates Ukraine Uganda Uzbekistan US Minor Outlying Islands Uruguay Venezuela Virgin Islands (British) Virgin Islands (UK) Vietnam Vanuatu Vatican City State Wallis and Futuna Islands Western Sahara Yemen Zambia Zaire Zimbabwe
Phone Number:
E-Mail:*
* Please enter your message in the box below: Dear sir, I am inquiring about the price & availability: ID:324 REf: 40041 Man 8x8 CAT A1 cargo truck with HIAB Crane

GENERAL TERMS For complete Terms & Conditions See Main Website. Sale Terms... Click here

SPARE PARTS We stock parts and accessories for every application: transmissions, repair kits, tyres, engines, undercarriage, belts, oils, filters and so much more! We have a full stock of spare parts, new and second hand. These parts are always on stock which avoids and delays in ordering.

SHIPPING Exports to any part of the world are possible and our freight department can deal with any shipment of equipment whether its 1 item or 10000 items.
- We can offer land, sea, or air freight.
- We deliver to over 150 countries

Click here

---

PLEASE FOLLOW US